Live Chat


Home Mileage Programmer Newest V4.94 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit Multi languages DP3
  • Newest V4.94 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit Multi languages DP3

    Item No.:GW-05000007

    V4.94 digiprog 3 is latest version of Digiprog3,
    1.Digiprog3 is a cost-effective mileage correction tool, which supports multi-languages and full range or vehicle.
    2.add more car models on the basic of V4.88.
    3.Newest Version: V4.94

    Download related files:
    1. latest-v4.94-digiprog3-vehicle-list.pdf

    2. digiprog3-adapter-list.pdf

    Product Description

    Newest V4.94 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit Multi languages DP3



    Top 5 Reasons to Get V4.94 Digiprog3 :

    1. Newest Version: V4.94

    2. Supported Languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.

    3. Has ST01/02 and ST04 Adapter in the Package Already, No Need to Buy Them Alone
    4. If you want to update your old version Digiprog3, please buy this V4.94 Update Service
    5. Power-On Password:1




    1. Don’t Update It yourself

    2. Don’t Connect to Computer while Using. Or it will have Blue Screen Problem
    3. Please Learn Basic Knowledge About Mileage Correction Before Order, As Most of Cars Need to Open Dashboard and Do the Soldering



    V4.94 Add Model List:

    Ford :
    -F150 24C16

    -Falcon 24c02

    Mercedes :

    -W176 new version

    -W204 new version Diag

    -w212 new version Diag

    Opel :

    -Insignia new version

    -Astra new version




    V4.93 Digiprog 3 Odometer Programmer:

    For Audi :

    A6 Diag new version

    A8 Diag new version

    For Mercedes :

    R 172 Diag new version

    R 231 Diag new version

    W 212 Diag new version

    For Ford :

    Kuga Transit

    For VW :

    Amarok Polo Johnson



    Digiprog 3 V4.94 Features:

    1. Service Interval Adjustments and Settings

    Assyst processing

    Fault memory read-erase

    EEPROM programmer

    Integrated PC communication



    Some Important Tips for Using Digiprog 3:

    1. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).

    2. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.

    3. Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned 4. completely as the solvent can damage the clips.



    Digiprog 3 Menu:

    1. EEPROM Menu

    The first option on the main menu is the Eeprom menu. Reading, writing and saving Eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction.

    2. CAR/TRUCK Menu

    This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format.

    3. Motorcycle Menu

    This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.

    4. Special Functions Menu

    The special functions menu is for use only by official DigiProg dealers.

    5. Setup Menu

    This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles.



    Using the EEPROM Menu:

    On some of the vehicles you will come across, an eight pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur you can always return to the point you started.The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04.



    Digiprog III V4.94 Screen Display:




    Package List:

    1pc x Digiprog3 Main Unit

    1pc x OBD2 Cable

    1set x Cables and Adapters

    Additional Information


    4.5KG ( 9.92LB )


    42cm*24cm*19cm ( Inch: 16.54*9.45*7.48 )


    There are no reviews yet.

    Be the first to review “Newest V4.94 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit Multi languages DP3”