DRUM STARTER: If for any reason it is necessary to replace the ignition cylinder, make sure to stop the transponder of the master key to the new key. Then you must code the secondary keys with the new key teacher.
Antenna: The antenna can be changed without problems. You do not need any specific procedure.
ECU MOTOR – DDS: Changing the control unit or system DDS diesel with a new, automatically encoded and can not be decoded more, so it can not be used in other vehicles. Central electronic immobilizer: can only be replaced by a new plant. Then it will be necessary to program the keys.
KEY / S SLAVE / S: The new keys must have transponder and must coded according to the procedure described above. Do not forget to encode all keys available.
MASTER KEY: the replacement of the master key is not possible. If only I was broken mechanical part, you can switch to another transponder key and continue to fulfill the function of encryption key.
SCANNER FUNCTIONS FOR MAGNETI MARELLI Fiat Palio / Siena
NOTE: In systems with electronic injection and enter the connector program Injection diagnosis.
A – FUNCTION CODES – Code of related failures:
ELECTRONIC KEY: Communication line interrupted with Central electronic immobilizer, unrecognized key, antenna or wrong code.
B- DATA FLOW FUNCTION
With this scanner you can see the following parameters in the function flow of data:
1- Electronic Key code
PROGRAM: The code is not memorized Central virgins..
NO PROGRAM: The two plants (Injection or DDS, and Immobilizer are virgins)
2 – UNIVERSAL CODE:
RECEIVED: ECU virgin
NOT RECEIVED: ECU not a virgin.
3 – ENGINE START
ALLOWED: The system is unlocked, the immobilizer is allowing startup. If the vehicle will not start, it is not problem immobilizer.
NOT ALLOWED: The system is locked, no output enable pulses to the injectors or solenoid activated stop. The key does not It was recognized or there is a problem with the system. View the status of light witness the board.
C- ACTUATORS FUNCTION: Start Emergency Code Card
If you select this item, a screen will appear asking the 5 digits the electronic code on the Code Card. And enter them on the button click OK and can you start the engine with any key alone for
this implementation. To re-start the engine after removing the contact will be necessary to repeat the entire procedure.
Remember: The key programming is done without intervention of any scanner or diagnostic apparatus in the first generation immobilizer.
ECU terminal depending on model:
PALIO / SIENA 1.6 MM SINGLE POINT ECU SPI TERM 1G7. 7
PALIO / SIENA MPI ECU 1.3 MM MULTI TERM 1G7. 7
PALIO / SIENA ECU 1.6 MM MULTI 16V 1AB / 1AF
TIDE 2.0 20V MULTI Motronic ECU M2.10.4
BRAVO / BRAVA 1370 CC MOTOR TERM. 6
BRAVO / BRAVA 1747 CC MOTOR HITACHI TERM ECU. 88
BRAVO / BRAVA 2.0 20 V MULTI TERM M2.10.4 Motronic. 47
BRAVO / BRAVA 1.6 16V 1AB MM MULTIPOINT ECU / 1AF TERM. 48
ALFA ROMEO 145/156/166 2.0 TWIN SPARK MULTI TERM. 16
ALFA ROMEO 145/156/166 2.5 V6 or 3.0 V6 MULTI TERM. 39
ALFA ROMEO 156/145/146 JTD Turbo Diesel Common Rail TERM. 13